DIESEL 3 Inch Chemical Transfer Poly Pump 7HP THORNADO Key Start

RRP $1,895.85
SAVE $631.95 (33%)
Sold Out
Usually Ships in 24 Hours

Calculate Shipping

THORNADO newly released diesel TH-DCP30A 3 inch chemical transfer pump is suitable for pumping Flexi-N-Chemicals. Driven by a high quality Thornado 7HP air cooled diesel engine with electric start.

The Thornado chemical pump is made of glass reinforced thermoplastic that resist the aggressive and corrosive affects from the attack of chemicals, water, sewage, or salt water. A wear resistant ceramic carbon mechanical seal used on our pump provides rugged construction for long life. And a heavy duty steel frame protects the pump and the engine on all sides. The pump is supplied ready to operate complete with suction strainer.

The pump has a suction/discharge diameter of 80mm, or 3 inches, this chemical pump has a maximum delivery lift of 35m and flow rate of 60,000 litre per hour. With the ability to draw water up to 8m in height, the Thornado 3 inch chemical transfer pump is sure to be helpful you in a variety of situations.

Look no further than Thornado for quality, range and value when investing in your new water pumps!



  • Powered by 7HP THORNADO DIESEL engine with electric start
  • Thornado engine - powerful, reliable and durable commercial grade engine.
  • Max heads 35 metres
  • Max flows 65,000 litres per hour
  • Suction depth 7 metres
  • 3 inch Suction/Discharge Ports
  • Anti-vibration design
  • High-quality ceramic mechanical seal - very critical to water pump
  • Rigid Mounted glass reinforced thermoplastic Volute and Impeller for corrosion free
  • Heavy Duty Full Frame Protection
  • Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
  • 12 Months Warranty


Suitable Applications

  • Chemical water (PH 4-11)
  • Water contains corrosion liquid
  • Water from fish tank
  • Acid liquid such as vinegar
  • Water transfer from dam


Model No TH-DCP30
Type Self priming, Centrifugal pump
Inlet Size 3 inch (80mm)
Outlet Size 3 inch (80mm)
Max Lift Head 35m
Max Flow 60,000 litres/hour
Max Suction Depth 8m
Engine DX-178E (7HP)
Engine Type 4 stroke, air cooled
Max Power HP / Rpm 7HP / 3600 Rpm
Displacement 296cc
Fuel Type Diesel
Oil Type SAE10w-30 / SAE15w-40
Fuel Tank Capacity 3.5L
Oil Capacity 1.1L
Run Time Full Tank ~5.5 hours
Starting System Electric Start & Recoil manual start
Water pH 4-11




Model # TH-DCP30
Shipping Weight 64.0000kg
Shipping Width 0.460m
Shipping Height 0.670m
Shipping Length 0.630m
Shipping Cubic 0.194166000m3
Unit Of Measure Each

Be The First To Review This Product!

Help other Thornado users shop smarter by writing reviews for products you have purchased.

Write a product review

You May Also Like

More From This Category