Description
THORNADO DIESEL 2 Inch Chemical Transfer Poly Pump 7HP Â Key Start – Viton Seal
THORNADO newly released diesel TH-DCP20A 2 inch chemical transfer pump is suitable for pumping Flexi-N-Chemicals. Driven by a high quality Thornado 7HP air cooled diesel engine with electric start.
The Thornado chemical pump is made of glass reinforced thermoplastic that resist the aggressive and corrosive affects from the attack of chemicals, water, sewage, or salt water. A wear resistant carbide mechanical with viton seals used on our pump provides rugged construction for long life. And a heavy duty steel frame protects the pump and the engine on all sides. The pump is supplied ready to operate complete with suction strainer.
The pump has a suction/discharge diameter of 50mm, or 2 inches, this chemical pump has a maximum delivery lift of 35m and flow rate of 32,000 litre per hour. With the ability to draw water up to 8m in height, the Thornado 2 inch chemical transfer pump is sure to be helpful you in a variety of situations.
Look no further than Thornado for quality, range and value when investing in your new water pumps!
Features
- Powered by 7HP THORNADO DIESEL engine with electric start
- Thornado engine – powerful, reliable and durable commercial grade engine.
- Max heads 35 metres
- Max flows 32,000 litres per hour
- Suction depth 7 metres
- 2 inch Suction/Discharge Ports
- Anti-vibration design
- High-quality ceramic mechanical seal – very critical to water pump
- Rigid Mounted glass reinforced thermoplastic Volute and Impeller for corrosion free
- Heavy Duty Full Frame Protection
- Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
- 12 Months Warranty
Suitable Applications
- Chemical water (PH 4-11)
- Water contains corrosion liquid
- Water from fish tank
- Acid liquid such as vinegar
- Water transfer from dam
*T&C’s Apply, see Warranty Policy for full details.
| SPECIFICATIONS |
| Model No |
TH-DCP20 |
| Type |
Self priming, Centrifugal pump |
| Inlet Size |
2 inch |
| Outlet Size |
2 inch |
| Max Lift Head |
30m |
| Max Flow |
32,000Â litres/hour |
| Max Suction Depth |
7m |
| Max Pressure |
42 PSI |
| Material |
Poly pump housing, impeller and diffuser |
| Engine |
DX-178PE (7HP) |
| Engine Type |
4 stroke, air cooled |
| Max Power HP / Rpm |
7HP / 3600 Rpm |
| Displacement |
296cc |
| Fuel Type |
Diesel |
| Oil Type |
SAE10w-30 / SAE30 |
| Fuel Tank Capacity |
3.5L |
| Oil Capacity |
1.1L |
| Run Time Full Tank |
2.5h at ¾ load |
| Starting System |
Electric/Recoil start |
| Product Length |
560mm |
| Product Width |
460mm |
| Product Height |
550mm |
| Product Weight |
56kg |
| In the Box |
Water pump, battery, hose fittings, hose clamps, intake strainer, user manual, |
THORNADO DIESEL 2 Inch Chemical Transfer Poly Pump 7HP Â Key Start – Viton Seal
THORNADO newly released diesel TH-DCP20A 2 inch chemical transfer pump is suitable for pumping Flexi-N-Chemicals. Driven by a high quality Thornado 7HP air cooled diesel engine with electric start.
The Thornado chemical pump is made of glass reinforced thermoplastic that resist the aggressive and corrosive affects from the attack of chemicals, water, sewage, or salt water. A wear resistant carbide mechanical with viton seals used on our pump provides rugged construction for long life. And a heavy duty steel frame protects the pump and the engine on all sides. The pump is supplied ready to operate complete with suction strainer.
The pump has a suction/discharge diameter of 50mm, or 2 inches, this chemical pump has a maximum delivery lift of 35m and flow rate of 32,000 litre per hour. With the ability to draw water up to 8m in height, the Thornado 2 inch chemical transfer pump is sure to be helpful you in a variety of situations.
Look no further than Thornado for quality, range and value when investing in your new water pumps!
Features
- Powered by 7HP THORNADO DIESEL engine with electric start
- Thornado engine – powerful, reliable and durable commercial grade engine.
- Max heads 35 metres
- Max flows 32,000 litres per hour
- Suction depth 7 metres
- 2 inch Suction/Discharge Ports
- Anti-vibration design
- High-quality ceramic mechanical seal – very critical to water pump
- Rigid Mounted glass reinforced thermoplastic Volute and Impeller for corrosion free
- Heavy Duty Full Frame Protection
- Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
- 12 Months Warranty
Suitable Applications
- Chemical water (PH 4-11)
- Water contains corrosion liquid
- Water from fish tank
- Acid liquid such as vinegar
- Water transfer from dam
*T&C’s Apply, see Warranty Policy for full details.
| SPECIFICATIONS |
| Model No |
TH-DCP20 |
| Type |
Self priming, Centrifugal pump |
| Inlet Size |
2 inch |
| Outlet Size |
2 inch |
| Max Lift Head |
30m |
| Max Flow |
32,000Â litres/hour |
| Max Suction Depth |
7m |
| Max Pressure |
42 PSI |
| Material |
Poly pump housing, impeller and diffuser |
| Engine |
DX-178PE (7HP) |
| Engine Type |
4 stroke, air cooled |
| Max Power HP / Rpm |
7HP / 3600 Rpm |
| Displacement |
296cc |
| Fuel Type |
Diesel |
| Oil Type |
SAE10w-30 / SAE30 |
| Fuel Tank Capacity |
3.5L |
| Oil Capacity |
1.1L |
| Run Time Full Tank |
2.5h at ¾ load |
| Starting System |
Electric/Recoil start |
| Product Length |
560mm |
| Product Width |
460mm |
| Product Height |
550mm |
| Product Weight |
56kg |
| In the Box |
Water pump, battery, hose fittings, hose clamps, intake strainer, user manual, |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.