THORNADO 2 Inch High Pressure Fire Fighting Twin Impeller Pump Kit
The Thornado 2 complete set of alluminium alloy twin impeller and aluminium alloy volute, silicon carbide mechanical seal, high quality elastomers and seals, hose fittings and strainer. This 2 inch pump kit is all you need for replacing or rebuilding your existing pump setup.
This Thornado 2 Inch High Pressure Fire Fighting Pump Kit is compatible with 5.5HP, 6.5HP or 7.0HP petrol engine or 4HP, 6HP and 7 HP Diesel engine with 19.05 threaded shaft or 20mm key shaft.
|Type||Self priming, Centrifugal pump|
|Inlet Size||2 inch (50mm)|
|Outlet Size||1x 2 inch (50mm) & 2x 1.5 inch (40mm)|
|Max Lift Head||80m|
|Max Flow||18,000 litres/hour|
|Max Suction Depth||7m|
|Matching Engine||Honda Engine: GX160, GX200
Honda Copy Engine: 168F, 168FI, 170F
|Shaft Type Compatibility||19.05mm Threaded Shaft (P - Type)||20mm Key Shaft (S - Type)|
|Unit Of Measure||Each|
Thornado PumpBy: Richard Murphy on 1 December 2019Bought one of these for a Honda & Hp motor . Very happy so far seems fine , good thing .
2inch centrifical pumpBy: douglas mcintosh on 28 June 2019this pump does a far better job than any other pump that i have ever had
2 Inch Fire Fighting Twin Impeller Pump Kit - 20mmBy: Andrew Jarosz on 27 March 2019The product was used as a replacement of the worn out original pump FX800. All mounting bolts matched the original perfectly. It was obvious and easy to assemble, however, no manual was attached.
2 inch twin impeller firefightersBy: Tom B on 24 January 2019Love it so far, but why can’t you supply same to match Honda shaft. You would sell a shit load more if you did.
Measure FirstBy: Kent Batchelor on 13 September 2018Good quality pump, but will not fit all GX160 engines without doing modifications. Some crankshafts have longer reach than others so pump needs to be spaced out before it can be fitted. The ceramic seal that comes with pump will not fit a 20mm diameter crankshaft.