THORNADO 2 Inch High Flow Water Transfer Pump Kit
The Thornado 2Inch High Flow Water Transfer Pump Kit is made of strong Die-Cast marine grade aluminium alloy. It comes with a complete set of cast irion impeller and volute, silicon carbide mechanical seal, high quality elastomers and seals, hose fittings and strainer. This 2 inch pump kit is all you need for replacing or rebuilding your existing pump setup.
This Thornado 2 Inch High Flow Water Transfer Pump Kit is compatible with 5.5HP, 6.5HP or 7.0HP petrol engine or 4HP, 6HP and 7 HP Diesel engine with Q-type key shaft diametre 19.05mm or 3/4 Inch.
|Type||Self priming, Centrifugal pump|
|Inlet Size||2 inch (50mm)|
|Outlet Size||2 inch (50mm)|
|Max Lift Head||30m|
|Max Flow||30,000 litres/hour|
|Max Suction Depth||7m|
|Matching Engine||Honda Engine: GX160, GX200
Honda Copy Engine: 168F, 168FI, 170F
|Shaft Type Compatibility||19.05mm Key Shaft (Q - Type)||20mm Key Shaft (S - Type)||19.05mm Thread Shaft (P - Type)|
|Unit Of Measure||Each|
Pump mounting boltsBy: Peter Beacroft on 21 February 2020The four mounting bolts supplied for securing pump to motor were correct length but are not the correct thread for a Honda GX160 motor. Correct thread for my genuine Honda motor was 5/16 inch x 24UNF. Be careful, If using the bolts supplied you may damage your motor housing and not be able to adequately secure the pump to motor and also not obtain a waterproof seal. Great transfer pump with excellent output and was the best value for money I could find. Be sure to pick up four bolts as above.