Thornado Water Pump Kit 2 Inch Fire Fighting Twin Impeller Fit 19mm Thread ShaftRated 4/5 based on 3 reviews.
THORNADO 2 Inch High Pressure Fire Fighting Twin Impeller Pump Kit - 19.05mm Thread Shaft
The Thornado 2 complete set of alluminium alloy twin impeller and aluminium alloy volute, silicon carbide mechanical seal, high quality elastomers and seals, hose fittings and strainer. This 2 inch pump kit is all you need for replacing or rebuilding your existing pump setup.
This Thornado 2 Inch High Pressure Fire Fighting Pump Kit is compatible with 5.5HP, 6.5HP or 7.0HP petrol engine or 4HP, 6HP and 7 HP Diesel engine with 19.05 threaded shaft.
|Type||Self priming, Centrifugal pump|
|Inlet Size||2 inch (50mm)|
|Outlet Size||1x 2 inch (50mm) & 2x 1.5 inch (40mm)|
|Max Lift Head||80m|
|Max Flow||18,000 litres/hour|
|Max Suction Depth||7m|
|Shaft Type Compatibility||19.05mm Threaded Shaft (P - Type)||20mm Key Shaft (S - Type)|
|Unit Of Measure||Each|
2inch centrifical pumpBy: douglas mcintosh on 28 June 2019this pump does a far better job than any other pump that i have ever had
2 inch twin impeller firefightersBy: Tom B on 24 January 2019Love it so far, but why can’t you supply same to match Honda shaft. You would sell a shit load more if you did.
Measure FirstBy: Kent Batchelor on 13 September 2018Good quality pump, but will not fit all GX160 engines without doing modifications. Some crankshafts have longer reach than others so pump needs to be spaced out before it can be fitted. The ceramic seal that comes with pump will not fit a 20mm diameter crankshaft.